HF Projects

Five non-tapering sections expand from just 63 inches to a full 21 feet. Bottom section is 1.5" in diameter with a plastic foot. Top section is 1" in diameter. Perfect for mounting most any small to mid-size antenna or for use as a center/end support for wire antennas. Heavy-duty thumb nut compression clamps make for quick and easy adjustments and installation. Note: When securely mounted at the base, no guying is necessary for most applications. Weighs just 4.6lbs for easy carrying and is great for supporting antennas you don't want to move in the wind or when a metal mast is preferred.

Matching Tri-Pod

Our Tri-Pod was designed specifically for use with this mast. Not only is it an exact fit, but it can be easily transported without removing the mast. The Tri-pod comes with triangular flat feet with holes for direct mounting to the ground. This unit can also be used independently with other 1.5" diameter masts or poles. Guying or base-weighting is recommended if the tri-pod is not secured to the ground.

This is a new tip-over type base with the tubes and couplers to make a 36-foot mast. You get the portable base (shown immediately below) and four 8-foot aluminum tubes each 2 inch diameter. The four tubes are connected together using four couplers (next picture). The couplers have holes for guying the mast every 8 foot. A top guy clamp is also provided. This would make an excellent system for emergency communications, a travel setup or field day.

 36 foot fold mast, 2 inch OD 6061 T6 Aluminum

 Highly portable, easy setup, emergency communications

 1/8 ID Tubing, 4 8-ft tubes, 4 joiners

 For more information, Contact Us and mention 36-ft mast

Fiberglass Push Up Poles